Filter By:
Cables
$44.99
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation.
- Dura-Ace grade SLR-EV Road brake cable set
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance
- Pre-lubed with special polymer compatible grease
$29.99
Shimano Stainless Road/MTB Brake Cable & Housing Sets
- 1 x 2000mm black 5mm housing
- 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables
- 2 end caps and 2 cable crimps
$49.00
SRAM OE replacement hose kits for SRAM and Avid hydraulic disc brakes.
- Black Banjo Hydraulic Brake Hose Kit fits both SRAM road and mountain bike brakes that feature a black banjo fitting at the caliper
- 2000mm black hose
- Includes hose, 2 threaded barbs, 2 olives, 4 compression nuts, hose clips, and T8 Torx L-Key
- Compatible with Level ULT, Level TLM (A1), Code R/RSC (B1), RED eTap HRD, S900 Monoblock
$6.99 - $7.00
- Left and right shifter compatible
- Road and MTB compatible
- 1.1mm polished stainless steel cable
$3.00
Fittings for Jagwire hydraulic hose.
- Compression Nut to install Jagwire hydraulic hose with SRAM brakes
- M8-0.75 Thread, 15mm Length
$3.49 - $4.99
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head.
- Galvanized
- Pre-stretched
- Double ended
- Cable Head: Shimano/SRAM, Huret/Simplex
- Defined Color: Silver
- Diameter: 1.2mm
- Double Ended: Yes
- Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
$1.00
Fittings for Jagwire hydraulic hose.
- O-rings for use with 6mm inline fittings
- Compatible with DOT fluid brake systems only
$29.99
Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.
$29.99 - $64.99
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
$12.99
- Replacement cable for the Jagwire Pro Dropper kit
- 0.8mm inner cable is more flexible and has lower friction than typical shift inner cables
- An easy way to reduce the force required to activate a dropper post remote lever
- Perfect for dropper seatposts with "stealth" cable routing and tight housing bends
- Includes 2x heat-shrink shims
- For use with dropper seatposts ONLY
- Length: 2000mm
$72.99
Road Elite Link brake cable and housing sets are constructed from interlocking aluminum links for completely compressionless operation. Combine that with the included low-friction Teflon cables and you've got the pinnacle of mechanical braking performance.
- Durable, aluminum housing won't kink or rust
- Compressionless housing results in crisp brake lever feel
- 50% lighter than traditional housings
- Linked design allows for tight bends without kinking during tricky cable runs
- Slick-lube liner
- Teflon coated slick stainless cables
- SRAM/Shimano road compatible cable end
Included in kit:
- Front Cable Length: 850mm
- Rear Cable Length: 1650mm
- Housing Length: 400mm w/610mm Lubed Liner
- 400mm w/1430mm Lubed Liner
- 240mm w/710mm Lubed Liner
- 26 Links
- 10 Mini Tube Tops
- 3 Cable Donuts
- 2 CGX 5mm Brake housing, 300mm
- 2 Open End Caps
- 2 Cable Tips
- 2 Adaptor End Caps
- 2 Rotating Hooks
$74.99 - $79.99
Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.
$37.99
Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike.
- Each Bottle contains 500 tips
$3.99
Fittings for Jagwire hydraulic hose.
- Compression Nut to install Jagwire hydraulic hose with Shimano brakes
- M8-0.75 Thread, 18.8mm Length
$13.99 - $14.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
$5.99 - $13.00
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- SRAM/Shimano mountain compatible cable end
- Stainless steel construction resists corrosion
- Single end cable features weld-cut for easy installation
$5.49 - $13.00
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
Page 1 of 1