Filter By:
- Parts & Accessories (25)
- Wheels (12)
- Hubs (3)
- Rims (1)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels

$1.80 - $7.35
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels.
- 14mm x 1mm (1411-AN) sold in pairs
- All others sold individually

$274.99
Rims: WTB HTZ i30 29"
- ETRTO 622-30
- Inner width: 30mm
- 6061 series aluminum
- Asymetric and angled spoke hole drilling distributes spoke tension more evenly
- Reinforced I-Beam profile
- Strong sleeved joint
- Drilled for Presta valve
- TCS 2.0 Tubeless System compatible
- Solid Strip included
- Tubeless valve included
- 32 holes
Rear hub: Shimano XT FH-M8010-B (Boost, HG)
- Center Lock (6-Bolt adapter included)
- Quick Engagement Freehub, 36 Points, 10 deg. engagement
- HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer)
- MS compatible 12 Spd Shimano Micro Spline only
Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Brass Polyax Nipples (Black)

$299.99
Rims: WTB HTZ i30 29"
- ETRTO 622-30
- Inner width: 30mm
- 6061 series aluminum
- Asymetric and angled spoke hole drilling distributes spoke tension more evenly
- Reinforced I-Beam profile
- Strong sleeved joint
- Drilled for Presta valve
- TCS 2.0 Tubeless System compatible
- Solid Strip included
- Tubeless valve included
- 32 holes
Rear hub: Shimano XT FH-M8110-B (Boost, MS)
- Center Lock (6-Bolt adapter included)
- Quick Engagement Freehub, 36 Points, 10 deg. engagement
- HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer)
- MS compatible 12 Spd Shimano Micro Spline only
Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Brass Polyax Nipples (Black)

$289.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles.
With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use.
“The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.”
Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch.
All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost.
The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes.
Arch S1 Wheelset
- Use: Trail and Enduro
- Internal Rim Width: 26mm
- Optimal Tire Size: 2.25 to 2.5-inch
- Hubs: Stan’s Neo 32-hole Front, 32-hole Rear
- Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples
- Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)

$475.00
- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits
- Tie beam triple-cavity rim design resists damage and prevents air loss under impacts
- 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires
- E-sync hubs
Specs:
- Wheel Tire Type: Tubeless Ready
- Wheel-Brake Comp.: Disc IS 6-bolt
- Rim Material: Aluminum
- Spoke Type: Sapim D-Light
- Valve: Presta
- Rim Construction: Double wall

$80.00
Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed.
- 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration
- Chromed steel bearings
- Wide bearing stance and axle design reduces flex and adds durability
- Low drag main seal prevents contamination and reduces resistance
- Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components

$14.99 - $24.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3

$19.99
Compatible with straight valve hole Hugo 52 rims and designed to fit 7.5 - 8.5mm valve holes. Sold as a pair.
Identifying your Hugo rim and selecting the correct valve stem:
Stepped Hugo rims have a larger diameter valve hole on the interior of the rim, and a narrower hole on outside of the rim.
Quick tip: don't remove your tire if you don't have to. If your Hugo rim decal reads:
MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this valve. For "Stepped" valve hole Hugo use part AS0105 - Valve Stem pair, Schrader, 32mm, 14mm base.

$60.99 - $62.49
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 24-inch
- ISO Diameter: 507 / 24-inch BMX
- Valve: Schrader
- Tire Type: Clincher

$89.99
Sta Tru Rear Wheels
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 27"
- Cassette Body Type: Threaded Standard 1.37" x 24tpi
- ISO Diameter: 630 / 27"
- Tire Type: Clincher

$119.99
The Spank 359 Rim is a radially compliant gravity rim featuring our Oohbah Inverted Inner Wall and BeadBite anti-burp technology. Optimized for DH, FR, and heavy enduro use.
- Moderately low 19mm profile height and wide width balances the benefits of radial compliance with high lateral stiffness and predictable handling.
- Radial Compliance improves traction over bumps and chatter while reducing negative feedback to the rider. Performance and comfort are improved.
- 5mm inner width is extremely versatile, fitting tires from 2.0" to 2.6", and even allowing + size tire use without negative squaring off of tire profiles.
- Bead Bite tubeless hooks enhance tubeless performance and tire security, even at lower pressures.

$129.99
- Series : DEORE XT
- Disc Rotor Mount : Center Lock Disc
- Axle Type : 12mm thru-axle
- Axle : 12x148mm
- Contact Sealing : Labyrinth & Contact
- Spoke Holes : 32H

$19.99 - $24.99
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork.

$159.99
MatchStix are a multi-functional multitool integrated/contained within a special/dedicated15mm thru-axle. Made in Asheville, NC, and available in various fitments, it acts as a chain breaker, 5mm hex, spoke tool, and bit receiver all in one. With its included bit sleeve and chain link holder, MatchStix is ready to help you out when you're out there.
- For Rockshox 100 x 15mm Forks
- Contains 6 stainless steel bits and bit sleeve: 6mm, 4mm, 3mm, T25 Torx, T30 Torx, and Flathead screwdriver
- Chainbreaker, 5mm Allen wrench, Presta valve tool/bit holder, and chain link retainer are integrated into removable lever
- Compatible chain quick links: KMC 9, 10, and 11 spd, SRAM 9 and 10 spd (SRAM 11 and 12 quick links are not compatible)
- 102g average weight, not including chain link
- Thread Pitch: 1.5
- Overall Length: 147mm

$39.99
Industry Nine Torch end caps allow the conversion to a variety of front axle standards.
- Includes a pair of end caps

$39.99
- 15 x 100mm thru-axle endcaps for Spin Doctor 6F (front)hub
- 20 x 110mm thru-axle endcaps for Spin Doctor 6F (front hub
- Conversion kits for Spin Doctor 6-Drive hubs are not compatible with original Spin Doctor and Spin Doctor Pro hubs

$12.75
- Strong nylon reinforced material handles high-pressures
- Adhesive backed for a secure fit
- Does not rot
- 0.5mm thick

$10.50
- Strong nylon reinforced material handles high-pressures
- Adhesive backed for a secure fit
- Does not rot
- 0.5mm thick

$6.18 - $14.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$7.99
Replacement freehub spoke protector, in various sizes for different freehub sizes.
- Made of clear plastic
- 3 hooks for affixing to spokes

$30.00
Secure
- Prevents theft instead of standard 9 mm quick-release skewers
Quick Assembly
- Use proprietary key on frame dropout
Construction
- Stainless springs with chromoly axle

$277.90
When heavy duty riding is your passion, the C 1800 is the right partner fro any mission. It is right at home at anything from jumping obstacles, cutting through mud and sprinting up steeps. Trademark DT Swiss reliability coming from precision hubs, sturdy bladed spokes and superb wheel build guarantee trouble free rides.
- Spline hub with 3-pawl system
- Straight-pull hub and spokes are laced 2-cross
- Includes tubeless ready tape and tubeless valve
Page 1 of 2
Next page