Chainrings

$84.95
Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52t rings.
- Fits 130 BCD 5 arm cranksets
- Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.
- Alternating wide/narrow tooth pattern prevents chain derailment
Compatibility:
- These rings are for use with 130 BCD 5-arm cranksets.
- Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800
- Not compatible with Campy CX10/11.
- SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features a fifth bolt with 1x specific shoulder. This kit can be found online.
- 38T important note: The chain may contact the spider arm slightly when using the 38T chainring (see last photo in the product images).
We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for 39T smallest ring.
- Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting.
Tech Specs:
- Weight: 38t/52g | 40t/60g | 42t/62g | 44t/79g | 52t/132g
- Material: 7075-T6 aluminum
- Made in the USA
- This 1x chainring and can be mounted in either the inner or outer ring position of a double crankset but can not be used in a 2x setup.
- Chainline - The most common mounting is in the outer ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring)
Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo.
Recommendations -
If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.

$99.99
Looking for a SRAM XO1, X1, GX, and NX chainring with the proven chain retention of our patented Drop-Stop® chainrings? Wolf Tooth has what you need in these beautifully machined 94 BCD bolt-on chainrings.
- Fits any 94 BCD SRAM crankset
- Drop-Stop® technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.
- Alternating wide/narrow tooth pattern prevents chain derailment
Compatibility:
- These rings fit any SRAM mountain bike crankset with a 94 BCD.
Note that we also offer SRAM direct mount chainrings for standard, boost and BB30 short spindle cranksets and some stainless steel versions.
- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention)
- Chainline - 49mm
- Provides a great chainline on most boost bikes.
Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
DROP-STOP A
Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc.
NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy
Recommendations -
If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.
Tech Specs:
- Weight: 30t • 44g | 32t • 54g | 34t • 63g
- Material: 7075-T6 aluminum
- Made in the USA
- US Patent 958123

$74.99
Looking for a 1X chainring for your Shimano compact triple crankset - models M782, M672, M622, or M612 – with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in this beautifully machined chainring with threaded standoffs that proved and ideal chainline.
- Fits any 96 BCDShimano Symmetric 4-bolt crankset
- Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.
- Alternating wide/narrow tooth pattern prevents chain derailment
Compatibility:
- These rings fit any 96 BCD Shimano Symmetric bolt pattern crankset, and here are instructions on how to measure your BCD.
- Compatible with the following Shimano crankset models: M782, M672, M622, M612
- Not compatible with XTR M9000 or XT M8000
- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention)
- Chainline - 49mm. Provides a great chainline on most boost bikes.
Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
DROP-STOP A
- Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc.
- NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy
Recommendations -
If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.
Tech Specs:
- Weight: 30/41g | 32t/50g | 34t/59g
- Material: 7075-T6 aluminum
- Made in the USA

$99.99
These chainrings are for Shimano direct mount cranks. The Wolf Tooth chainrings feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance.
Compatibility:
- Shimano XTR M9100, XT M8100, SLX M7100, and Deore M6100 series 12 speed cranksets.
- Our chainring offset matches the offset of Shimano chainrings to replicate the intended chainline for the crankset.
- Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A.
DROP-STOP ST
- Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only
- Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain
Recommendations -
If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.
Tech Specs:
- Weight: 32t/66g | 34t/72g | 38t/81g
- Material: 7075-T6 aluminum
- Made in the USA

$26.00 - $26.99
- Trushift chainrings feature shift ramps and pins
- Drivetrain compatibility: 8, 9, 10, 11
- 104mm BCD

$9.99 - $44.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

$19.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

$60.99 - $64.99
Shimano XT CRM80 1x11 Chainrings
- Hollow gear construction for optimized rigidity, weight, and rigidity
- Durable teeth using plated steel construction supported by a carbon composite (CFRP) carrier body
- Dyna-Sys11 HG-X11 11-speed chain compatible
- Chainring BCD: 96 Shimano Asymmetric
- Color: Black
- Drivetrain Speeds: 11
- Material: Steel/Carbon
- Ring Position/Type: Chain Retaining Single Ring
- Tooth Count: 30

$19.99 - $165.00
Shimano Ultegra 6800 11-Speed Inner Chainrings
- Material: Aluminum
- Ring Position/Type: Inner

$94.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

$21.00 - $76.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

$24.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
- For use with 38t AM-type outer ring

$119.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

$9.00 - $26.99
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

$23.00 - $24.99
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

$19.99 - $24.99
Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain.
- Designed to be used with Eagle chain
- Material: Steel

$99.99 - $137.99
The radical look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. They subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain’s performance in all conditions. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.

$42.00
The radical new look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.
- Can be used with Eagle 12 speed or SRAM 11 speed chains
- Direct mount rings with 3mm offset fit Boost geometry Eagle cranks; direct mount rings with 6mm offset fit traditional geometry - Eagle cranks and GXP spindle XX1, X01, X0, X1 and X9 cranks

$99.99
Make SRAM 1x even better with the simplicity of the SRAM X-SYNC Direct Mount chainring. Engineered in Germany, the new Direct Mount rings brings lighter weight and greater simplicity to XX1, X01, X1-1400, and GX-1400 cranksets. SRAM’s Direct Mount rings give riders the perfect opportunity for a serious upgrade.
- Fully CNC AL rings
- X-SYNC technology
- Lighter weight than spider version (~25-50g depending on size)
- Offset: 0mm (BB30), 6mm (GXP)

$19.99 - $24.99
The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price.
- Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring

$69.99
Take your chain retention to the quiet, simple, light level with SRAM's X01 X-Sync Chain Ring. It features SRAM's X-Sync narrow/wide tooth profiles to securely hold a chain through the roughest terrain, no chainguide required! A variety of sizes ranging from 30T to 38T let you dial in your rig for your ride. The unique chainring design allows you to slide the ring over the crank arm, so crank removal is not required. Available in 94mm BCD for SRAM's X1 cranks, or 104mm BCD to convert your standard crank to a single-ring system.

$44.99
12 Speed Sweetness
If you're looking for a bomber new chainring that can run with your Shimano 12-speed drivetrain, then look no further. This ring, with our NW tooth profiling can bolt to any 104 BCD spider and is stiff, turning all your "push" into straight-up "go".
Drivetrain Fully Dialed
Bringing renowned RF narrow-wide tooth profiling for chain security to your 12-speed Shimano drivetrain with a 104 BCD crankset.
Built to Last
Made of a 4mm-thick 7075-T6 alloy plate for big-time stiffness and superhero strength.
- Compatible with 104 BCD 4-Arm Cranks
- 7075 Aluminum

$44.99 - $69.99
RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH, and everything in-between.
- 7075-T6 aluminum, aerospace grade strength
- Compatible with 9, 10, 11 and 12 speed
- Stiff 4mm plate thickness and I-beam construction transfer loads without flexing
- Reversible laser etched graphics
- Non-threaded bolt holes

$64.99
Direct Mount 3-bolt chainrings compatible with SRAM cranksets with a removable Spider. Narrow Wide tooth profiling ensures ultimate chain retention.
- 7075-T6 aluminum, aerospace grade strength
- Stiff 4mm plate thickness to transfer loads without flexing

$20.00 - $27.00
This direct mount chainring coincides perfectly with the Comet Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain.
- Long tooth profile enhances chain retention
- Thick-Thin tooth design for maximum chain engagement
- Laser-etched logos

$28.00 - $59.99
- Precision CNC-machined AL7075/T6
- Shifting ramps and stainless steel pins on outer rings
- Laser-etched logo
- Crankset Compatibility: Gossamer ABS 2019

$19.99 - $39.00
Shifting performance has helped Full Speed Ahead to become a world leader for high-end chainrings. No one studies the design and manufacturing of each system, and each tooth, as carefully as we do. Our dedication shows in every revolution of the crank, and every perfect shift achieved. To meet or exceed the needs of any drivetrain, Full Speed Ahead has developed sophisticated design, testing and manufacturing protocols. This allows Full Speed Ahead to match your needs as perfectly as our chainrings match a chain. We offer more options, levels, and finishes than our competitors. We use the best materials available, imported from the USA, Europe, or sourced from our qualified vendors in Asia, to guarantee the durability, performance, and appearance will out-perform, and outlast the competition. Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations.
True value and performance are found in this FSA road chainring. It offers both long wear life and smooth shifting.
- Stamped AL7075/T6
- N11 chainrings are compatible with all 10 speed drivetrains, and compatible with FSA, SRAM and Shimano 11-speed drivetrains
- Ramped and pinned for excellent shifting
- FSA 110 BCD - 4-Bolt
- Material: Aluminum
- Ring Position/Type: Inner

$33.99 - $49.99
FSA Super Road Chainrings are designed to provide flawless shifting, with minimal weight and unmatched durability.
- Precision CNC machined AL7075/T6 alloy

$165.00
Shimano's Ultegra 6800 chainrings provide confidence-inspiring shifting and category-defining speed. Cold-forged aluminum comprises these super-stiff, hollow outer rings, and Shimano's unique system of ramps and pins means lightning fast shifts are at your command.
- Bolt circle diameter: 4-bolt 110mm asymmetric
- 50T pairs with 34T inner ring
- 52T pairs with 36T inner ring
- 53T pairs with 39T inner ring
Inner rings sold separately

$64.99
The Shimano Deore XT SM-CRM85 chainring is designed for use with Shimano's M8100 and M8130 1x cranksets.
- Special MTB gear tooth profile with Dynamic Chain Engagement+ improves chain engagement and retention
- Direct Mount Type: Direct Mount Shimano
- Tooth Count: 28T, 30T, 36T
- Drivetrain Speeds: 12
- Defined Color: Black
- Ring Position/Type: Chain-Retaining Single Ring
- Round or Oval: Round
- Chainline/Hub Compatibility: 141/148 Boost Hubs , 157 Super Boost Hubs
Page 1 of 2
Next page